Hello,
The below error received in WUhandler.log. Machine have space in C Drive.
OnSearchComplete - Failed to end search job. Error = 0x8007000e.WUAHandler8/29/2014 11:24:40 AM20272 (0x4F30)Please help to solve the issue.
Regards,
Boopathi s
Hi,
Just wondering if anyone has been successful with this? Older versions seemed more favourable to automated installs, but I haven't been able to get this to work for 10 or 11.
Thanks.
Hi,
I'm running SCCM2007 and have a remote site DP configured that is constantly trying to process a package as shown in the distmgr.log. The package no longer exists on the main server and having searched the SQL db, I'm unable to locate it anywhere, yet it still tries every couple of seconds.
I've tried the queries below and nothing is returned.
SELECT * FROM PkgServers where NALPath = '["Display=\\<Name of DP>\"]MSWNET:["SMS_SITE=<Site Code>"]\\<Name of DP>\' and PkgID = '<ID>
select * from SMSPackages where PkgID = 'XXX00001'
select * from PkgStatus where ID = 'XXX00001'
select * from PkgServers where PkgID = 'XXX00001'The distmgr.box/incoming has been emptied
Any ideas would be greatly appreciated.
Cheers
Dear SCCM guys,
I am trying to run TS for that delete files older than 30 days without any luck, i tried all scenario i think i should change something in the code but i don't have that experience in scripting,
command as following
forfiles -p %appdata%\Microsoft\Signatures\ -m *.* -d -30 -c "cmd /c del /q @path"
error as below:
Run command line Process completed with exit code 1 Command line returned 1 ERROR: The specified directory does not exist. . The operating system reported error 1: Incorrect function.
Thank you
I have a DP on the other side of the world that has been acting up lately. I distribute packages to other DPs fine, but some of the packages don't ever show up as "installed" on my sccm 2007 console. They stay in "Install Pending".
Looking at the status messages, I see a ton of information messages:
2300 - beginning to process...
2342 - starting to process...
2301 - completed processing successfully...
These repeat over and over and over into the thousands for the same few packages. When I examine the distmgr.log on the primary site server, I don't see it having issues sending to this DP. When I examine sender.log I see it writing to the DP successfully. On the dp (which is in a secondary site), I see the distmgr.log go through spurts of processing a ton of the mentioned packages, but never completing or finishing. On a lot of them I see that the versions are wrong.
I've been looking at other suggestions, and I might try the PreloadPkgonSite tool. However in looking at the distmgr\incoming inbox on my secondary site/dp, there are a bunch of xxx.pkg files (nothing in the Incoming\bad folder). These .pkg files aren't named the same as my package ids in question, but when i examine the contents they reference the packages in plain text.
My question is: Should I delete (or move) these .pkg files in the inboxes\distmgr.box\incoming folder on my secondary/dp? I don't see these files on other sites, just this one, and there are a lot, but only a dozen or so recently.
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:998F14BB-3582-472A-87BF-8FC5AEAA19DB";
DateTime = "20090121094833.455000+000";
HostName = "SERVER.net";
HRESULT = "0x80072efd";
ProcessID = 3968;
StatusCode = 0;
ThreadID = 1528;
};
Error sending DAV request. HTTP code 0, status ''
GetDirectoryList_HTTP mapping original error 0x80072efd to 0x800704cf.
GetDirectoryList_HTTP('http://Server.net:9449/SMS_DP_SMSDP$/SMSPKG/C0100274') failed with code 0x800704cf.
Job {B893238E-F0F5-416D-B0C9-A27E8A5EE044} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
I have done some research on the web and a lot of people are centralising the problem to be the parent server and recommending IIS lockdown etc, but i found the download to be still working on the SMS 2003SP3 clients assigned to the same parent so this tells me it can't be permissions.
has any one any advice of where to start looking next?
Thanks
Hi
I’m setting up a package for Robocopy that copy files from C drive of a target machines into a network share.
This is the robocopy bat file i am using:
ROBOCOPY "C:" "\\servername\Test" /tee /e /eta /copy:dt /r:01 /w:01 /log+:"\\servername\Test\testLog.txt" /if *.doc *.xls *.ppt *.pdf *.msg *.pst *.jpg *.zip *.txt
t
-I Set up a package with this batch file
-Added a program to the package pointing to this batch file
general program properties are:
Run:Hidden
After running:No actionrequired
Environment:
Run with administrative rights
drive mode: Runs with UNC Nam
-Advertised it to a collection
But when after the advertisment i get the following error and nothing gets copies:
Script for Package:CHV02E94, Program: ITF Robocopy failed with exit code 16
Any advice
I download and customized the Adobe XI Pro MSI file and also saved the MST file. Now, when I run the MSI file, it asks all the options, which have been customized and saved.
I will save the whole package in a shared folder and let the user run the installer to install the Adobe Pro XI in their machines without selecting any option. Any idea about accomplishing this task.
Prior to my arrival it was standard practice to use a custom share folder when distributing packages. From the console this is in thepackage properties window on the data access tab. They were instructed to selectShare the distribution folder (2nd radio button) and provide aShare name of CommonRootFolder\Vendor_Application_Version. SCCM then creates a share called CommonRootFolder and a folder under that.
Recently we were getting complaints that users were not getting software at our branches. While troubleshooting we discovered that all of our branch distribution points no longer have the CommonRootFolder share. To fix that issue we're updating a small package which seems to recreate the share, but was wondering if anyone has ever heard of this happening.
Hi,
We are using sccm 2012 r2 cu2. we are in middle of migration.
We have in sccm 2007 under secondary site server name assd1 it contain MP and DP role.
Under ASSd1 server i was created one of the distribution point server and copied all the package to the new server assd2.
I created this new distribution point last week.
Today I gathered data from sccm 2007 to sccm2012.
Previously I did the same almost 5 servers and after sccm2012 administration-->under site hierarchy--> shared distribution point it shows. after that i will migrate to sccm2012 DP
but this server not showing. but when i saw migctrl.log i can see the log
The DP assd2.xxx.org is eligible for upgrade
but not showing under administration-->under site hierarchy--> shared distribution
Hi.
Deploying Microsoft DirectAccess Connectivity Assistant from SCCM 2007 to windows 7 clients.
Client is rebooting automatically during / after? program instal.
In Advertisement status i get this message:
Windows Installer per-user elevation of this program ("C010023F" - "DirectAccess client x64") failed for advertisement "C0120415". The operating system reported error 1603: Fatal error during installation. This program was started.
Please check the status of this program to determine whether or not it was completed sucessfully
Possible causes: The version of Windows Installer on the computer is less than version 2.0, or the setup program does not support Windows Installer per-user elevated rights installations.
Possible solutions: Update the version of Windows Installer on the computer to version 2.0 or later, or contact the software vendor that supplied the install program to determine if a version of setup that supports per-user elevated rights is available.
I have tried two different instal strings:
msiexec.exe /qb! /i "DirectAccess_Connectivity_Assistant_2_0_x64.msi" ALLUSERS=2 /m SIIITTT
msiexec.exe /i "DirectAccess_Connectivity_Assistant_2_0_x64.msi" /qn
Application log on client says Installation completed successfully.
What is the reason for the unwanted reboot?
I have installed the sw manually, that works fine. No reboot there.
Hi,
When we get a popup to run a program in taskbar and executed it then it is getting failed. But if the program is executed from Control Panel -> Run Advertised Program then it is success.
What is the change here. Please help me.
Regards,
Boopathi S
Hi team,
I saw some issue in distmgr in cm12. We are middle in the migration.
In the distmgr belo error showing for particular package.. Also want to know about sccm PKGstatus_g_ak table.. is this table i am not able to see in cm12 DB..
*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'PkgStatus_G_AK'. Cannot insert duplicate key in object 'dbo.PkgStatus_G'. The duplicate key value is (0010078A, 2, W01, ["Display=\\WBGFPMLBKO01.wb.ad.worldbank.org\"]MSWNET:["SMS_SITE=W01"]\\WBGFPMLBKO01.wb.ad.worldbank.org\, 1). : tr_PkgStatus_upd
Cannot update the status of package 0010078A, error = 3
Thanks
Gokulnath
How to copy software to distribution points manually for creating software advertisement because my organisation network bandwidth is 512kbps so it is very critical to deploy windows-7 sp1. so I plan to create software distribution by copying manually to distribution points.
Hello,
On a single primary site of SCCM 2007, how many packages and programs are allowed to create/supported.
Thanks & Regards,
Muthukumaran
MuthuKumaran
Hello All,
I have been struggling with this for the last few days. I have been trying to deploy Applications from a DFS share but cannot get it to work. It appears that the MSI cannot be found
when MSIEXEC is invoked (error 1619). I have checked the paths and permissions and there does not appear to be an issue there (both the Site Server and installation user account have permissions). Under the Deployment Type I have the following:
Content Tab - Empty
Programs Tab
Installation Program: msiexec /i "\\dfsroot\Software\Install\7zip\7z920x64.msi"
Installation start in: \\dfsroot\Software\Install\7zip
User Experience Tab
Installation behavior: Install for system
Logon requirement: Whether or not a user is logged on
Installation program "font-family:'Open Sans', sans-serif;font-size:14.2857141494751px;">I checked the event log on the client and MSIEXEC is getting invoked
under the SYSTEM account. That obviously won't work.
What am I missing?
I have an application I'm trying to deploy and it works fine when manually running the app (silently) on my test machine. When deploying it from SCCM and then trying to run the program you get a message saying "Run time error 429 - activex component can't create object".
I can silently run the exe for the app from a command prompt. I can also do the same if I use the programs MSI file instead.
If I use the exe, msi or batch from SCCM it fails. I've tried deploying when a user is logged in or logged off.
One of the frustrating issues is I have been able to make it work on some systems, but not all. It fails more often than not. I'm wondering if it has something to do with a windows update (maybe .net framework) that isn't the same on each system.
I have already checked logs and haven't been able to find anything.
Any ideas?